Skip to content

Design

3D — 4D Printing | D1GIT, 120g Dossier 02

Giulia Grassi · · Automatically translated from Italian

An interview with Alessandro Tassinari


While 3D printing on a large scale is still primarily used for prototyping, allowing for the experimentation of techniques, materials, and designs, there are few examples of its application in the construction of permanent architectural structures. What do you think are the major limitations of this technology?

Perhaps you were expecting an explanation related to the technical limitations of machines or materials. Certainly, there is still much to be done in these areas, but I believe the biggest limitations lie elsewhere, specifically in the practices of the construction industry today. Construction has always been one of the slowest industries to adopt technological innovations. It usually takes several years for a new technology or a new design/construction method to be adopted. Just think about the journey that computer graphics and rendering had to take before becoming as widely used as they are today, or the challenges BIM is facing in its integration. However, this is also understandable: building, and especially designing for building, requires a great deal of time and energy. Often, there is little time for reflection and analysis; instead, there is a constant need to submit drawings, documents, and updates as quickly as possible. This inevitably slows down the integration of new design and production methods, favoring those already in use by architectural firms and the construction industry.
When we talk about 3D printing, imagine a scenario where you simply press a button and a machine, almost magically, creates a new product from nothing – in this case, a structure. Unfortunately, the reality is far different from this futuristic vision. 3D printing is a process that requires time in every stage. In the design phase, it’s necessary to consider architectural, structural, production, material, environmental, and assembly aspects. In the production phase, the materials used must always comply with the laws of physics. Starting from these considerations, we can begin to understand what it truly entails to bring 3D printing technology into the world of architecture, and we can imagine the challenges involved in scaling it up. It’s a completely different way of thinking, designing, and engineering, and it needs to be integrated into the minds of designers not as a replacement for traditional techniques, but as an alternative method that, depending on the circumstances, may prove to be more advantageous. It’s simply a matter of time: 3D printing requires designers and technicians to acquire new skills. But this is the least problematic aspect of the whole issue: after all, if a professional understands that a tool will be useful in their work, they will seek to acquire it as soon as they have the opportunity.

In the field of construction, robotics for 3D printing is mainly useful for on-site material handling and for the production of prefabricated elements that can be assembled. 4D printing, thanks to research into materials, seems to have the right potential to breathe new life into this technology. Do you believe that “self-assembly,” thanks to programmable materials, could also reach the field of construction?

There is certainly a lot of potential in 4D printing, especially for the exterior cladding of buildings. Today, there are already responsive systems that alter the “skin” of buildings, true membranes that move through electrical, mechanical, aerobic, or liquid impulses, and that allow for optimization of energy consumption, ventilation, and the amount of light entering the building. All that is needed is to connect the system to a network, provide information about the geographic location, the time of year, real-time environmental conditions, and the rest is done. Looking further ahead, however, the self-assembly of structures produced with additive technologies will be a revolutionary breakthrough, especially in situations where human intervention is difficult. If we needed to build any structure on an extraterrestrial planet, it would be more practical to send a container with machinery and materials that, completely autonomously, could move and self-assemble. A few years ago, I worked on the topic of soft robotics. I am convinced that a significant part of the future lies there.

3D printers have been around for several years now, yet they have not yet been integrated into industrial production due to safety concerns. This has certainly fostered the flourishing development of an autonomous and independent maker culture, but it has also “relegated” this technology to a level of research that is detached from market realities. What do you think the future holds? Are we at a turning point (for the entry of these machines into industries)?

It is incorrect to say that 3D printers have not become part of industrial production. 3D printing has been used for industrial prototyping since the 1980s, when the first patents were filed. In the following years, with the optimization of technologies, it has also been used for the production of small batches. The reason we are only hearing about it more recently is due to the significant advancements in low-cost and open-source projects, which have eliminated the cost and knowledge barriers that the industry had imposed, achieving widespread success. In this way, additive manufacturing has finally become accessible to everyone. This has allowed researchers and universities to study and improve production processes without being tied to large brands and companies, fostering a more genuine and open type of research. However, when it comes to making the leap into the industrial world, it is always necessary to start by adhering to standard parameters. We must, rightly, engage with the world of certifications, both for the machines and for the materials. Regarding architecture and construction, the challenge of the near future will focus on this very issue: achieving quality standards that, regardless of size and the numerous variables, can guarantee valid results for the use of the produced parts. This will allow for the production of high-quality components that can be used without problems in the construction of structures and finishes, which is currently the main reason why in-situ 3D printing is not gaining much traction in the industry. On the other hand, we are moving closer and closer to prefabrication in controlled environments.

Read also